👋 Welcome to Engdahl Motorsport webshop! 🏁
⚙️ We deliver tested ECU solutions and parts for serious builds
✈️ We ship most of the inventory internationally
!! Note!! Closed for Vacation week 27-28 and 30-31
Count on long dilivery times.
⚙️ We deliver tested ECU solutions and parts for serious builds
✈️ We ship most of the inventory internationally
!! Note!! Closed for Vacation week 27-28 and 30-31
Count on long dilivery times.
Follow us on social media 
New
Discount 5%
SMP 1680cc
€85.81€81.63
Lowest price in the last 30 days€81.84SMP 1680cc @ 3 bar diffuser. Low impedance. 14mm.
Works well with Gasoline, Ethanol and Methanol.
Nice spreader even on low load. Note that these are low ohm, which we no longer recommend.
Flow matching:
These spreaders are delivered flow matched directly from supplier (within 3%).
- Secure payment by card
- E-mail us, we reply swiftly!
Description
Article no.: 430
Coil Resistance: 12.5 Ohms / High Impedance / High-Z (No ECM driver modifications required)
Static Flow Rate @ 43.5PSI ( 300kPa ) w/Gas: 60 lb/hr = 630 cc/min = 453 g/min
Static Flow Rate @ 87PSI ( 600kPa ) w/Gas: 85.7 lb/hr = 900 cc/min = 648 g/min
Gain: 0.11ms/mg
Offset: 0.055ms
Turn on time @ 14VDC: 1.14ms
Turn off time: 0.85ms @ 600KPa
Connector: Bosch EV1
Series: DEKA 4 ( DEKA IV )
Orifice Type: Multi-orifice
Injection Pattern: 30 Degree Injection Cone
Factory fitted with Viton upper and lower o-rings